Kit that can replace Kirami drain valve with traditional ball valve. The kit is suitable for most Karami's plastic hot tubs, except Tiny.

The kit consists of three parts that are connected to the 2 ½ inch inside thread in a Kirami hot tub instead of the original Kirami drain valve. The hose connector in the kit can be used with the same kind of 38mm inside measured hose as the normal valve.

0
Product code
PVSETTI
https://s3-eu-west-1.amazonaws.com/mod-kirami-img/images/PVSETTI__w0zb1j9s__full.jpg
https://s3-eu-west-1.amazonaws.com/mod-kirami-img/images/PVSETTI__c4r2acbp__full.jpg
https://s3-eu-west-1.amazonaws.com/mod-kirami-img/images/PVSETTI__5bgfthyz__full.jpg
Käytössä
Alternative drain valve kit
Alternative drain valve kit parts separately
Alternative drain valve kit installed
Alternative drain valve kit
Alternative drain valve kit parts separately
Alternative drain valve kit installed

Measurements

Manuals

Technical Info

Weight
0.84
Packing length
23
Packing width
22
Packing height
16
The included thread tape shall be used with all threaded connections so that they will be watertight. Connect the adaptor muff into the 2 ½ inside thread in the tub. Then connect the ball valve to that and lastly connect the hose connector to the valve. Notice that this kit makes the bottom pipe drain centered, so it does not drain fully with this kit installed, 1-2cm of water will remain in the pipe.