logo

Original Woody XL

The traditional Woody, made out of ThermoWood, brings the genuine atmosphere of real wood into the bath. The calming, earthy brown colour of the hot tub blends into nature. You can sense the scent of fresh ThermoWood when you step into the water. Woody XL is large enough even for a bigger crowd: you can fit all of your friends in the same tub. Woody is the first and best choice for bathers who value tradition and authenticity!

The hot tub is heated with a submerged Sub heater placed inside the tub; it is silver in colour and the door is decorated by a wooden handle. It is made out of high-quality marine-grade aluminium. The heat-treated pine used in the outer shell is a Finnish alternative for dark-coloured imported wood. ThermoWood is a high-quality, long-lasting material with a warm brown colour that maintains its shape well.

The barrel diameter is 220 cm and water volume 3180 litres. It is suitable for 8-12 people. The dry weight of the hot tub is 260 kg. The gross heat output of the SUB stove is 42 kW and the net heat output transferred to the water is 27 kW.

FI
1
Outer color
Käytössä
Kirami’s Original Woody XL is traditional hot tub for a larger group. Kirami’s Original Woody XL is traditional hot tub for a larger group.
Kirami’s Original Woody XL is traditional hot tub for a larger group. Kirami’s Original Woody XL is traditional hot tub for a larger group.

Measurements

Manuals

Technical Info

Capacity (persons)
8-12
Fillage Volume
2450
Capacity
3180
Outer diameter
220
Height (tub)
138
Depth
95
Product length
220
Product width
220
Product height
313
Weight
260
Packing length
220
Packing width
220
Packing height
138
It is important to place the tub on an even surface that can bear the whole weight of the tub. The foundation can be evened out with chips or it can be cast of concrete. We recommend placing some boards or planks on top of the base because when the bottom of the tub is clearly in the air, it airs well and dries. It is also important to ensure that the tub is not covered by grass or hay, as it will prevent the wood from breathing and will cause rotting. When placing the hot tub consider possible places to drain water to. If needed you can lead off the water with an outlet hose. Hot tub’s outlet is located under the hot tub near heater and the outlet’s inner diameter is 50 mm. Take fire safety in consideration when placing the hot tub. Always ensure that the chimney is located away from flammable materials. Remember to check the distance both sideways and vertically to avoid the risk of fire. Note that the discharge valve should always be left open in an empty tub so that water gathered into the tub can run out. During wintertime do not leave the water unattended, in case there is a risk of sub-zero temperatures. You can either drain the water out of the tub or maintain a sufficient heat. The bottom plugs and exhaust valves need to be left open so that any water collected to the tub will discharge. Before lighting up hot tub’s heater always remember to check water level inside of the tub. The heater must not be lit when the tub is empty or the water level is below minimum fill limit. You must not start emptying the tub before the fire and embers have burnt out completely. The minimum fill limit is marked on the heater and in the instructions. In order to keep the hot tub, clean you can buy a model-specific cover. You can also take care of the cleanliness and hygiene of the tub by washing and drying it carefully and often. Washing can be done, for example, with Kirami Biowash. Kirami sells chemicals that can be used for keeping the water clean. When using chemicals, the pH of the water should always be monitored and kept in the given limits, i.e. 7.0-7.6. The diameter of the chimney is 150mm and its lenght is 2m.

Also get accessories