The Family hot tub has been developed to take the needs of the whole family into account, regardless of age and physical condition. As part of hot tub’s design there a bench that can be used to cool off and children can sit on it more easily. You can rest your back on the specially designed edges of the bench. The design of the bench is ideal to climbing into and out of the hot tub. On top of practicality and easy access the safety is better with the bench.
The hot tub is heated with an external grey Cult-si heater, suitable for heating small tubs. It is made out of high-quality marine-grade aluminium. The outer shell is made out of Finnish spruce panels stained with a dark coal tint, and it keeps its attractive appearance for a long time. As inside colour, ocean blue is velvety smooth with translucent surface. This blue colour makes sailors to relax with blue moments after sunset.
The barrel diameter is 170 cm and water volume 1370 litres. It is suitable for 3-5 people. The dry weight of the hot tub is 141 kg. The gross heat output of the CULT-si stove is 36 kW and the net heat output transferred to the water is 22 kW.
It is important to place the tub on an even surface that can bear the whole weight of the tub. The foundation can be evened out with chips or it can be cast of concrete. In a partly EPS-based tub, any runs should not be installed beneath the base as the tub’s base needs to be on an even surface, which is completely load-bearing. When placing the hot tub consider possible places to drain water to. If needed you can lead off the water with an outlet hose. The water discharge valve is located on the opposite side of the stove to which you can attach Kirami outlet hose. The hose has 38 mm inner diameter. Take fire safety in consideration when placing the hot tub. Always ensure that the chimney is located away from flammable materials. Remember to check the distance both sideways and vertically to avoid the risk of fire. During wintertime do not leave the water unattended, in case there is a risk of sub-zero temperatures. You can either drain the water out of the tub or maintain a sufficient heat. The bottom plugs and exhaust valves need to be left open so that any water collected to the tub will discharge. Before lighting up hot tub’s heater always remember to check water level inside of the tub. The heater must not be lit when the tub is empty or the water level is below minimum fill limit. You must not start emptying the tub before the fire and embers have burnt out completely. The minimum fill limit is marked on the heater and in the instructions. In order to keep the hot tub, clean you can buy a model-specific cover. You can also take care of the cleanliness and hygiene of the tub by washing and drying it carefully and often. Washing can be done, for example, with Kirami Biowash. Kirami sells chemicals that can be used for keeping the water clean. When using chemicals, the pH of the water should always be monitored and kept in the given limits, i.e. 7.0-7.6. The diameter of the chimney is 120mm and its length is 1,5m.